HDMI Receiver/Transmitter
Receiver
Transmitter
HDMI Repeater
Matrix
Repeater
Splitter
Switcher
HDMI HEAC / ARC
HEAC
ARC
LVDS
Bridge
Receiver
Transmitter
DVI & HDCP
Receiver
Transmitter
USB & Controller
USB2.0
CEC Controller
MCU
IP
 
 
 
 
EP263
Overview
 
The EP263 is a low cost DVI receiver with Dual DVI links built in single 100-pin LQFP package. It is compliant to DVI Revision 1.0 specification and supports display resolution up to 330 M pixels/second. The build-in PLL requires no external component. The on-chip Link On detection circuit works even when the chip is put in Power Down mode. A Secondary Link Active detection circuit is also provide on-chip.
Feature

The DVI Receiver EP263 includes the following distinctive features:
•    DVI specification 1.0 compliant
•    Selection of Single-Link or Dual-Link operation
•    Selection of Single-Port or Dual-Port output data in Single-Link mode
•    Operation pixel rate: 25MHz - 330MHz
•    PLL requires no external components
•    High skew tolerance: 1 full input clock cycle for inter-channel within a link plus
1 full input clock cycle between links
•    Low current consumption in Power Down mode
•    Link On detection even in Power Down mode
•    Secondary Link Active detection
•    Controllable tri-state for output port
•    Single 3.3V CMOS design
•    100-pin LQFP (Pb-Free, compliant to JEDEC/IPC J-STD-006)

 
  .微驅科技股份有限公司EXPLORE MICROELECTRONICS INC.
新竹市科學工業園區園區二路47號105室 RM 105, No. 47, Park Ave 2, Hsinchu Science Park, Hsin-Chu, Taiwan, R.O.C. TEL:886-3-564-3595 FAX:886-3-564-3596
  .益士伯電子股份有限公司Explore Semiconductor, Inc.
台北縣汐止市新台五路一段79號5F之4 5F.-4, No. 79, Sec. 1, Shintai 5th Rd., Shijr City, Taipei, Taiwan, R.O.C. TEL:886-2-26989727