EP9633C

Part Number:EP9633C

Overview

EP9633C is a Display Port (DP) 1.2 to HDMI 2.0 Converter which accepts DP 1.2 inputs and converts the video/audio streams to HDMI 1.4/2.0 output. The DP input port supports 1/2/4-lane DP receiving up-to 5.4 Ghz bit rate. The HDMI output port supports HDMI 1.4 up-to 3 Ghz bit rate and HDMI 2.0 up-to 6 Ghz bit rate. In DP RX Port, both HDCP 1.4 and HDCP 2.2 decryption is supported. In HDMI TX Port, both HDCP 1.4 and HDCP 2.2 encryption are supported. The chip is compliant with Display Port 1.2a, HDCP 1.4, HDCP 2.2 and HDMI 2.0 specifications. The chip supports 24-bit video up-to 4K2K 60 Hz frame rate. EP9633C is integrated with an on-chip eFlash MCU with pre-programmed firmware driver for HDCP 1.4/2.2 and HDMI 1.4/2.0 control. Software development effort can be greatly reduced.

Features

• Display Port Specification 1.2a Compliant
• HDCP Specification 1.4 / 2.2 Compliant • HDMI Specification 2.0b Compliant
• Support 1/2/4 -lane Display Port receiving up-to 5.4 Ghz bit rate
• Support HDMI 1.4 output up-to 3.0 Ghz bit rate
• Support HDMI 2.0 output up-to 6.0 Ghz bit rate
• Support HDCP 1.4 /2.2 decryption for DP input
• Support HDCP 1.4 /2.2 encryption for HDMI output
• Integrated on-chip HDCP Keys.
• Support 24-bit video up-to 4K2K 60 Hz frame rate
• Support LPCM and compressed surround audio
• Integrated EDID memory for both DP input port
• 3.3V and 1.2V power required
• Support Power Down mode and low stand-by current
• 64-Pin QFN E-PAD package

Block Diagram